Blurred letter edges
Possible cause | Remedy |
|
|
LED is dirty. | Clean LED with lens cleaner or soft tissue. |
Cannot print desired | Replace toner cartridge (see “Toner Cartridge |
color because toner | |
is low. |
|
|
|
One side of printed pages appears blurred
Possible cause | Remedy |
|
|
Top cover is not | Press the cover release latch and open, then |
properly closed. | close, the cover. |
|
|
One or more of the | Open the top cover and check to be sure that |
toner cartridges is | each toner cartridge is fully seated and that each |
not seated properly. | toner cartridge lock lever is pushed all the way |
| back. |
|
|
Toner rubs off when you rub the printed surface.
Possible cause | Remedy |
|
|
Media Weight and | Set the value of media weight in the menu to |
Media Type settings | the next heaviest one (MEDIA MENU →YYY |
may not be appropriate. | MEDIA WEIGHT). |
|
|
Packing materials were | Careful! Fuser my be HOT! |
left on the fuser when it | Open the top cover and check to be sure that |
was installed. | all the packing materials were removed from |
| the fuser. To remove the fuser see “Fuser |
| |
|
|
Troubleshooting • 136