![](/images/new-backgrounds/1264946/264946113x1.webp)
(b)When HDD INITIALISE is displayed, press Select (3) button.
(c)Press Item (1) button to shutdown the printer. The printer has to be switched off and back on again to initialise the hard disk before use.
Printer driver
Macintosh USB connection
1.Drag the printer icon from the desktop into the waste bin and empty the waste bin.
2.Create a new desktop printer and the settings will be updated automatically.
Macintosh network connection
1.Open [Chooser], click on [Adobe PS] and select the printer.
2.Click on [Setup] - [Configure].
3.Select [Hard disk] from [Installable options] and then select [Installed] from the drop down list.
4.Click on [OK] button twice and close [Chooser] to complete the
English
Duplex unit
If your printer includes the duplex unit, please use the following procedure to make sure that duplex printing has been enabled in the printer and printer driver.
Printer
1.Press Menu (0) button until PRINT MENU is displayed, then press Select (3) button.
2.Press Item (1) button until DUPLEX is displayed.
3.Press Value (2) button until ON is displayed and press Select (3) button. An asterisk (*) appears to show that duplex has been set to on.
4.Press Online (4) button to turn the printer back on line.
Printer driver
Macintosh USB connection
1.Drag the printer icon from the desktop into the waste bin and empty the waste bin.
2.Create a new desktop printer and the settings will be updated automatically.
Chapter 3 - Macintosh Setup | 49 |