![](/images/new-backgrounds/1264946/26494629x1.webp)
English
2.Open the top cover.
3.Remove the LED head restrainer (1) from behind the LED heads in the top cover.
4.Remove the orange transport lock (2) from behind the coloured lever (3) on top of the fuser unit.
Note: To ease removal of the transport lock, it may be necessary to move the coloured lever (3) slightly. The coloured lever will return to its original position under spring loading after it has been released.
CAUTION:
Never expose image drums to light for more than 5 minutes. Never expose image drums to direct sunlight. Always hold image drums by the ends. Never touch the surface of the green drum inside the image drum.
5.Remove the four image drums and place them on a level surface.
6.Remove the protective sheets (1) from each of the four image drums.
7.Push the tab (2) inwards and remove the blanking plate (3) from each of the image drums.
Chapter 1 - Printer Setup | 7 |