7.Open the left and right Pin Tractor covers (1) and feed the continuous forms in the direction of the arrows, locating the sprocket holes (2) in the forms onto the sprocket pins. Ensure that the forms are properly aligned on the sprocket pins (3), then close the covers.
1
2
3
8.Adjust the right Pin Tractor (1) to accommodate the width of the continuous forms, taking care that the forms are held neither too loosely nor too tightly between the Pin Tractors. Press the locking lever (2) down to lock the right Pin Tractor in the desired position.
1
2
9.Close the Rear Cover by gently swinging it downwards to the horizontal and then pushing it inwards until it locks into position.
Paper handling > 23