SPECIFICATIONS
ITEM | SPECIFICATION |
|
|
Model No. | D21008B (ML6300FB) |
|
|
Print method | Impact dot matrix |
|
|
Print head | 24 pins, 0.2 mm (0.0079 in) diameter |
|
|
Print direction | |
|
|
Print speed |
|
High Speed Draft (HSD) | 400cps @ 10 cpi |
Letter Quality (LQ) | 100 cps @ 10 cpi |
Utility | 300 cps @ 10 cpi |
|
|
Line Feed (LF) time | Approximately 65 ms per line for LF of 4.23 |
| mm (1/6 in) |
|
|
Form Feed (FF) speed | Approximately 114.3 mm/s (4.5 in/s) |
|
|
Paper feed control | Paper feed: yes |
| Vertical tab: yes |
| Direct line feed: yes |
|
|
Duplication capability | Continuous forms: the original page +5 |
| more pages (total maximum paper thickness |
| less than 0.36 mm) |
| Cut sheet: the original page +5 more pages |
| (total maximum paper thickness less than |
| 0.36 mm) |
|
|
Feeding direction | Feed forward |
| Feed backward |
|
|
Feeding mode | Friction feed mode (front) |
| Pin tractor feed mode (rear) |
|
|
Continuous forms tape tail | Detected when remaining paper is |
detection method | approximately 24 mm long. It can, however, |
| print till about 6 mm from the paper bottom |
| (measured at the centre of the characters). |
| (The print accuracy of the last page cannot |
| be guaranteed.) |
|
|
Character sets | Standard ASCII |
| Epson (Italics/Graphics) |
| IBM (Set1/Set2) |
| Foreign |
| Code Page |
|
|
Specifications > 62