2.Check the position of the tear-off perforations (1) relative to the paper cutter (2). (Paper Tray (3) is shown for clarity.)

2

3

1

(a)To advance the forms, hold down the TEAR button and press the FF/LOAD button.

(b)To retract the forms, hold down the TEAR button and press the LF button.

NOTE

If a movement greater than +- 7/90 in is specified, the QUIET indicator blinks and the above adjustment cannot be made.

3.Release the buttons after the tear-off perforations have been aligned with the paper cutter.

REMOVING CONTINUOUS FORMS

1.Tear off the continuous forms. See “Tearing off continuous forms” on page 24.

2.Press the SEL button to set the printer off-line and reposition the continuous forms in the printer.

3.Press the PARK button to move the front edge of the continuous forms backwards to the Pin Tractors.

NOTE

The ALARM indicator illuminates to indicate there is no paper present.

If sprocket holes of the last page of the forms disengage from the sprocket pins, do not attempt to eject the paper to avoid the possibility of a paper jam.

Paper handling > 25