Oki ML6300, ML6300FB BUTTON SWITCHES, SWITCH, STATUS, FUNCTION

BUTTON SWITCHES

SWITCH	STATUS	FUNCTION
SEL	On-line	Sets the printer to off-line
	Off-line	Sets the printer to on-line
		and disalarms the printer
SHIFT		Used only in conjunction
		with one of the following
		buttons: SEL, LF, FF/LOAD,
		PARK, TEAR described
		below.
LF	On-line	Feeds paper by one line.
		Holding the button down
		results in continuous line
		feeding.
	Off-line	Feeds paper by one line.
		Holding the button down
		results in continuous line
		feeding.
FF/LOAD	On-line and off-line	Continuous form fed until
	Continuous Forms mode	first line of next page
	On-line and off-line	Ejects the cut sheet
	Cut sheet manual mode
TEAR	On-line	Delivers the continuous
	Continuous Forms mode	form to the cut position. If
		the button is pressed again
		or data is received, the
		original form position is
		restored.
	On-line	Ineffective
	Cut sheet manual mode
	Off-line	Ineffective
PARK	Continuous Forms mode	If the continuous form is in
		position, press to retract the
		form to the Pin Tractors.
		(If the sprocket holes of the
		last page of the form
		disengage from the sprocket
		pins, do not attempt to eject
		the paper as a paper jam
		may result.)
SHIFT+SEL		Enters menu mode

Operating instructions > 30