Oki ML6300, ML6300FB manual 51

PROBLEM	CAUSE	ACTION
When cut sheets are	The paper setting	Match the paper setting
used, the content of a	selected in the	selected in the
single sheet is printed	application does not	application with the
on two sheets.	match the physical	physical paper in use.
	paper size.
	It does not match the	Leave enough top and
	lines per page as the	bottom margin in the
	printer automatically	application.
	detected.
		Correct the cut sheet LF
		adjustment.
The content of a single	The left and/or right	Reselect the left and
line is printed in two	margins are not	right margins correctly
lines.	correctly selected.	in the application.
When continuous forms	Tear-off perforation	Cancel tear-off
are used, several blank	spacing is selected.	perforation spacing.
lines appear in the
printout.
Broken and uneven	This may happen in	Use Print Registration in
vertical lines.	bidirectional printing.	the adjustment mode to
		adjust.
Too large or small line	Line spacing is not	Reselect line spacing
spacing.	selected correctly.	correctly in the
		application.
Split print
Blanks appear in	This is a paper feed	This is not a failure.
graphic printout.	error, which is
	especially notable in
	printing regular
	characters.
Blanks or deformed	This is a paper feed	This is not a failure.
characters appear in	error due to line feeding	Use the printer's built-in
double height type or	in printing a single
		fonts when you print
other extended types.	character.
		important documents or
		bills.
Improper cut sheet feed
No paper feed.	Sheets are located off	Load sheets with their
	the paper guide.	left edges against the
		paper guide.
	Sheets are not loaded	Load sheets to the end.
	to the end.

Troubleshooting > 51