Oki ML6300, ML6300FB ITEM, SETTING, FUNCTION, INITIALISING MENU SETTINGS

ITEM	FUNCTION	SETTING
Registration Low	Adjust the print starting	-10 – -1
	position on printing in	0
	the reverse direction.	+10 – +1
	(The position moves to
	the right or left in 1/
	720 in increments.)
Registration Normal	Adjust the print starting	-10 – -1
	position on printing in	0
	the reverse direction.	+10 – +1
	(The position moves to
	the right or left in 1/
	720 in increments.)
Registration High1	Adjust the print starting	-10 – -1
	position on printing in	0
	the reverse direction.	+10 – +1
	(The position moves to
	the right or left in 1/
	720 in increments.)
Registration High2	Adjust the print starting	-10 – -1
	position on printing in	0
	the reverse direction.	+10 – +1
	(The position moves to
	the right or left in 1/
	720 in increments.)
LF Revise (Cut Sheet)	Adjust a line feed	-14 – -1
	amount in cut-paper	0
	mode.	+14 – +1

INITIALISING MENU SETTINGS

To restore the menu settings to their initial values, carry out the steps below.

NOTE

The values adjusted by the Adjustment menus are not initialised by the following procedure.

1.Set the Power Switch to OFF.

2.Press and hold down the SEL and SHIFT buttons together then set the Power Switch to ON.

Operating instructions > 40