Omega manual A2400 Command Set, RT3

Command Set 4-6

Each A2400 user command is described in detail following Table 4.1. All of the commands are listed in alphabetical order according to command nomenclature.

Table 4.1 A2400 Command Set

Command and Definition		Typical	Typical
		Command	Response
		Message	Message
			($ prompt)
DO	Digital Output	$1DO01	*
RD	Read Data	$1RD	*+99999.99
REA	Read Ex. Address	$1REA	*3031
RID	Read Identification	$1RID	*TANK FARM 1
RLP	Read Long Prompt	$1RLP	*7D
RS	Read Setup	$1RS	*31070000
RSP	Read Short Prompt	$1RSP	*7B
RSU	Read Setup	$1RSU	*31070000
RT1	Read Time delay 1	$1RT1	*+00100.00
RT2	Read Time delay 2	$1RT2	*+00352.00
RT3	Read Time delay 3	$1RT3	*+00050.00
WE	Write Enable	$1WE	*
Write Protected Commands
EA	Extended Address	$1EA3031	*
ID	IDentification	$1ID TANK FARM 1	*
LP	Set Long Prompt	$1LP25	*
RR	Remote Reset	$1RR	*
SP	Set Short Prompt	$1SP40	*
SU	Setup	$1SU31070000	*
T1	Set Delay Time 1	$1T1+00100.00	*
T2	Set Delay Time 2	$1T2+00352.00	*
T3	Set Delay Time 3	$1T3+00050.00	*

These A2400 Commands are Exclusively for Extended Address mode

CC	Close Channel	{01CC	*
OC	Open Channel	{01OC	*