4.5.8.2 Device Setup -EIT

This option allows the users to add up to eight device labels, commands and a response unit. The iServer will send the entered commands on the serial port and will receive the responses from those devices. Clicking on Readings page link will show the response.

You can setup and display your device’s different values (e.g. Peak and Valley). Refer to your device’s Serial Communication Manual for a list of

Commands.

On this page there is a Device Number column (No), which has numbers from

1 to 8. These numbers are links to the parameters of the device; click on them to enter the device name, command and unit.

Figure 4.17 iServer DEVICE SETUP Page (-EIT)

32

Page 38
Image 38
Omega C4EIT/-EIT manual iServer Device Setup Page -EIT