Download Config – Using this option you can download the configuration file that contains all the settings stored in the iServer and use it as a reference.
Upload Config – Using this option you can upload the saved configuration file to the iServer.
It is recommended to download and store a working copy of this configuration 
file in case the device is configured improperly. You can then set the iServer
to its default settings and upload the configuration file again.
Reboot is required anytime the “Defaults” has been loaded, or there has been changes to the network parameters or serial parameters.
Before reboot a message will appear asking if you are sure you want to proceed with the reboot. If you choose to reboot, please wait 15 seconds before reconnecting.
4.5.12 Diagnostics
This page provides diagnostic information for the iServer. It includes information such as Serial port or Ethernet data received or transmitted and has the ability to reset the counters. Also other network devices can be pinged from here. Fields are described below.
Figure 4.23 iServer DIAGNOSTICS Page 4.5.12.1 Diagnostics - Serial Port
Bytes Received – This is the number of bytes received by the iServer on its serial port.
Bytes Transmitted – This is the number of bytes transmitted by the iServer on the serial port.
The Reset Counter button can be clicked and the number of bytes received and transmitted will reset to 0.
37
