Omega C4EIT/-EIT manual Part Specifications, Serial Interface -C4EIT

PART 5

SPECIFICATIONS

Serial Interface (-C4EIT)

Interface:	RS422 or RS485 (2-wire)
Connector:	Terminal Block Plugs
Serial Data Rates:	300 to 460,800 bps*
Characters:	*iSeries Controller max is 19,200 bps
	5, 6, 7, or 8 data bits
Parity:	odd, even, or none
Stop Bits:	1 or 2
Flow Control:	Software (Xon/Xoff) and None
Network Interface
Interface:	Fixed 10BASE-T half duplex Ethernet
Connector:	RJ-45
Protocols:	TCP, UDP, SNMP, SMTP, TFTP, ICMP, Telnet, DHCP, DNS,
Compliant to Standard:	HTTP, ARP, and Modbus TCP/IP
	IEEE 802.3
Indicators (LED’s):	10BASE-T (green) not active, On/Network (green),
	Serial Transmit Tx (yellow), Serial Receive Rx (green);
Processor CPU:	Power (green)
	ARM7, 72 MHz
Processor Memory:	512 Kbyte Flash, 32 Kbyte SRAM
Embedded Web Server:	Serves dynamic Web pages and Java applets
Management:	Device configuration and monitoring through Embedded Web
General	Server, Telnet login, Serial login, iConnect
Environmental
Operating Temperature:	0 to 50°C (-32 to 122°F), 90%RH non-condensing
Line Voltage/Power:	90 to 240 Vac +/-10%, 50 to 400 Hz*
	110 to 375 Vdc, equivalent voltage
	4 W, power for i8, i16, iDR Models + Ethernet
	5 W, power for i8DV, i8DH, i16D Models + Ethernet
Low Voltage/	* No CE compliance above 60 Hz
Power Option:	20 to 36 Vdc, 4 W
	External power source must meet Safety Agency Approvals.
	*Units can be powered safely with 24 Vac power but,
	no Certification for CE/UL are claimed.

39