Appendix J

iPORT (continued)

J-3 iPORT Configurations (continued)

192.168.1.200

20005000

Figure J-3 iPORT Main Window

Figure J-4 COM Port Window

iServer IP Address – This is the IP address of the iServer that is connected to the serial device on one end and attached to the Ethernet LAN on the other end. The iServer’s default IP address is 192.168.1.200, which can be changed to fit your network IP address range (see Section 4).

iServer Port Number – This is the port number for the iServer’s local serial port. The default value is 2000. If this port number is changed in the iServer’s Configuration page (see Section 4.5.4.1), the same number should be placed in the iPORT window.

63

Page 69
Image 69
Omega C4EIT/-EIT manual Figure J-3 iPORT Main Window