2.4.2.1 Enabler Command Line Options
To configure a DAQP series card, the Enabler requires one command line argument from the user to determine the configuration. This argument must be enclosed in parenthesis. Within the argument, a comma (no space) must be used to separate the parameters from each other if there are two or more parameters. The following parameters may be specified in the command line argument:
s | socket | Specifies the PCMCIA socket number to configure. “Socket” must be in the |
|
| range 0 - 15. This option is always required. |
b | address | Specifies the base I/O address of the DAQP card in hexadecimal. “Address” |
|
| must reside on an even |
|
| option is required if the “r” option is not used. |
i | irq | Specifies the interrupt level (IRQ) of the DAQP card in hexadecimal. “Irq” must |
|
| be one of the following values: 3, 4, 5, 7, 9, 10, 11, 12, 14, 15, or 0 if no IRQ is |
|
| desired. This option is required if the “r” option is not used. |
waddress Specifies the base address of the memory window required to configure the DAQP card. Set “address”= D0 for a memory window at D0000, D8 for a memory window at D8000, etc. Valid settings for address are C8, CC, D0, D4, D8, and DC. If omitted, “address” = D0 is assumed.
r | Instructs the Enabler to release the resources previously allocated to the DAQP |
| card. When this option is used, B address and I irq options will be ignored. |
| Therefore, do NOT use this option when initially configuring the DAQP card. |
2.4.2.2 Enabler Examples | |
Example 1 | DEVICE = C:\DAQPA_EN.EXE |
No command line argument is specified. The Enabler will report an error and display the proper usage of the Enabler.
Example 2 DEVICE = C:\DAQPA_EN.EXE (s0,b300,i5)
In this example, the Enabler will configure the DAQP card in socket 0 with a base address 300H and IRQ level 5 using a configuration memory window at D0000H.
Example 3 DEVICE = C:\DAQPA_EN.EXE (i10,b310,s1)
In example 3, the Enabler will configure the DAQP card in socket 1 with a base address at 310H and IRQ level 10 using a configuration memory window at D0000H. Note the parameter order is not significant.
22 |
