Figure耟2 – 23
2.6 Installation of Compact Flash CF card
A 16MB Compact Flash Card is installed in each recorder. If a bigger capacity Compact Flash card is required, and the user decides to buy it locally, please check the brand name of CF card. To be compatible, it should be one of two recommended brands SanDisk or Transcend. Other brands are not compatible therefore not recommended.
Installation: First insert Compact Flash card to the end, then turn the stopper to the right.
Pulling out: First turn the stopper to the straight direction, then pull out the CF card.
Note:
To read measured data and events on CF card, it is necessary to install software Observer I or II on PC first. Then, connect a CF reader to USB port of PC. Finally, insert CF card into the reader.
The power should be turned off while inserting input and output cards. It is not recommended to insert input or output cards while the unit is switched on.
26
