2. Installation and wiring
2.1 Unpacking
If any damage is found while unpacking, the user should contact the local representative at once. It is suggested that the special packaging is retained for possible future requirement.
2.2 Installation
Remove stains from this equipment using a soft, dry cloth. Don’t use harsh chemicals, volatile solvent such as thinner or strong detergents to clean the equipment in order to avoid deformation or decoloration.
The recorder is designed for indoor use and not in any hazardous area. It should be kept away from shock, vibration, and electromagnetic fields such as variable frequency drives, motors and transformers.
It is intended to be operated in the following environment:
Pollution Degree Level II | IEC1010-1( | |
Temperature | 5 ~ 50 ˚C |
|
Humidity | 20 ~ 80 % RH ( | |
Power | 90 ~ 250 VAC, 50/60 Hz | |
| ||
Panel mounting style
The front side
Figure 2 - 1
13
