An example of Totalizer: A factory operates for 8 hours a day, and the staff wish to get the total volume of production from daily, weekly and monthly reports. First, the user needs to enter into Tools mode, do the settings as follows, then totalizer starts to work from 8:30 am, and stops at 17:30 pm daily. After production has finished, the user does the following: press Event key on the left hand side, and press Mode key to select Report mode. Finally, press Report key to choose daily, weekly or monthly report.
Timer1 |
|
|
|
Type: Daily |
| Action: Enable |
|
Time - Hour: 8 | Min: 30 |
|
|
Job1: Reset Totalz | Target: Tolz1 |
| |
Job2: Enable Totalz | Target: Tolz1 |
| |
Timer2 |
|
|
|
Type: Daily |
| Action: Enable |
|
Time - Hour: 17 | Min: 30 |
|
|
Job1: Disable Totalz | Target: Tolz1 |
| |
Job2: Log Report | Target: Tolz1 |
| |
Totalizer |
|
|
|
Name: xxxx |
| Desc : xxxxxxxxxxxxxxxxx |
|
Source: AI1 |
| Action: Enable | Decimal: 1 |
Period: Min |
| Unit: xxxx | Preset: 0.0 |
Event |
|
|
|
|
No | Type | Setpoint | Job1 | Job2 |
1 | Hi | xxxx | Log Alarm | Set DO on |
2 | Low | xxxx | Log Alarm | Set DO off |
The Weekly Report shows the following information:
The week’s production volume: Monday: 990, Tuesday: 1010, Wednesday: 1020, Thursday:
1020, Friday: 980 respectively. The weekly report shows production volume 5,020.
42
