Omega Vehicle Security HHP-2000 Series

LEAKTESTING

Thisfunction enables testing for leaks in pressure systems. The

instrumenthas a function to automate leak testing in a variety of

applications.

Automaticleak test results are logged, not stored and cannot be

outputdirectly via HHP-2000DL into your MLWINsoftware. Tosend

leaktest results to your PC please use your PC’s Hyper Terminaland

outputas to an Epson Printer. Whenentering pressure values (P1,

P2,P3) you must enter numbers to exactly the same number of

decimalplaces as full pressure range of the instrument being used.

Thenumber of decimal places required can be seen in the table of

pressureranges on the back page.

LEAKTESTING

Thisfunction enables testing for leaks in pressure systems. The

instrumenthas a function to automate leak testing in a variety of

applications.

Automaticleak test results are logged, not stored and cannot be

outputdirectly via HHP-2000DL into your MLWINsoftware. Tosend

leaktest results to your PC please use your PC’s Hyper Terminaland

outputas to an Epson Printer. Whenentering pressure values (P1,

P2,P3) you must enter numbers to exactly the same number of

decimalplaces as full pressure range of the instrument being used.

Thenumber of decimal places required can be seen in the table of

pressureranges on the back page.

AVERAGING

MAX/MIN

Press key(when in mode)and symbol,together

withaverage reading, will appear on display. Press

toreturn to mode.

AVERAGING

MAX/MIN

Press key(when in mode)and symbol,together

withaverage reading, will appear on display. Press

toreturn to mode.

SETTINGUP

Press key(when not in mode)and and

symbolswill appear on the display. Enter pre-stress pressure level

(ifpre-stress pressure function is not required, press key) and the

displaywill show and symbols.Keyin start pressure and

press keyand the and symbolswill now be displayed.

Keyin test time in minutes and seconds (MM.SS), press key and

the and symbols will now be displayed. Keyin permissable

changein pressure and press key. The instrument is now ready

torun test and will appear on display.

MAX/MIN

NE P1

NE P3

SETTINGUP

Press key(when not in mode)and and

symbolswill appear on the display. Enter pre-stress pressure level

(ifpre-stress pressure function is not required, press key) and the

displaywill show and symbols. Key in start pressure and

press keyand the and symbolswill now be displayed.

Keyin test time in minutes and seconds (MM.SS), press key and

the and symbols will now be displayed. Keyin permissable

changein pressure and press key. The instrument is now ready

torun test and will appear on display.

MAX/MIN

NE P1

NE P3

OUTPUTOF DATA

Thisfeature will only function if either the or symbols are

displayed.

Toviewdata press key,then and keys. Thefirst stored

readingwill be displayed. Press keyto view successively stored

readingsand any other key to return to normal mode.

Tooutputdata to a PC press key, then key.

EnsurePC/Printer is ready to

receiveinformation.

Aftertransmission, the unit will return to normal operation and any

autologging will stop.

Toerasestored data press key,then and keys.

Therewill be a delay before the unit will accept the key and

symbol will be displayed. Thisis to help stop accidental erasure.

Aftererasure, neither or symbolswill be displayed. Theunit

willreturn to normal mode.

Theselected transmit option will be displayed during transmission.

Ifafter pressing keyyoudo not wish to

deletedata, you must turn instrument off and on, then the stored

datawill not be lost.

Tooutputdata to an Epson compatible printer press key,followed

by key. Printersettings must be as follows: 9600 Baud, 8 data bits,

NoParity,One stop bit, No flow control. It is also possible to print to

HyperTerminalin your PC in this way.

OUTPUTOF DATA

Thisfeature will only function if either the or symbols are

displayed.

Toviewdata press key,then and keys. Thefirst stored

readingwill be displayed. Press keyto view successively stored

readingsand any other key to return to normal mode.

Tooutputdata to a PC press key, then key.

EnsurePC/Printer is ready to

receiveinformation.

Aftertransmission, the unit will return to normal operation and any

autologging will stop.

Toerasestored data press key,then and keys.

Therewill be a delay before the unit will accept the key and

symbol will be displayed. Thisis to help stop accidental erasure.

Aftererasure, neither or symbolswill be displayed. Theunit

willreturn to normal mode.

Theselected transmit option will be displayed during transmission.

Ifafter pressing keyyoudo not wish to

deletedata, you must turn instrument off and on, then the stored

datawill not be lost.

Tooutputdata to an Epson compatible printer press key,followed

by key. Printersettings must be as follows: 9600 Baud, 8 data bits,

NoParity,One stop bit, No flow control. It is also possible to print to

HyperTerminalin your PC in this way.

Press key. symbol and will appear on the display.

Enterrequired time interval in hh:mm (ie, in order to take a reading

every1 minute, key in 0001) and press key. Current reading will

returnto display and symbol will remain on display.

NE 0000

Instrument

willcontinue logging until a maximum of 250 readings are taken or

datais down-loaded.

Press key. symbol and will appear on the display.

Enterrequired time interval in hh:mm (ie, in order to take a reading

every1 minute, key in 0001) and press key. Current reading will

returnto display and symbol will remain on display.

NE 0000

Instrument

willcontinue logging until a maximum of 250 readings are taken or

datais down-loaded.

WARRANTY/DISCLAIMER

RETURNREQUESTS / INQUIRIES

OMEGAENGINEERING,INC warrants this unit to be free of defects in materials and

workmanshipfora period of 25 months from the date of purchase. OMEGAWarranty

addsanadditional one (1) month grace period to the normal one (1) year product

warrantytocover handling and shipping time. Thisensures that OMEGA’S

customersreceivemaximum coverage on each product. Ifthe unit malfunctions, it

mustbereturned to the factory for evaluation. OMEGA’sCustomerService Depart-

mentwillissue an Authorized Return (AR) number immediately upon phone or written

request.Upon examination by OMEGA, if the unit is found to be defective, it will be

repairedorreplaced at no charge. OMEGA’SWARRANTYdoes not apply to defects

resultingfromany action of the purchaser, including but not limited to mishandling,

improperinterfacing,operation outside of design limits, improper repair, or

unauthorizedmodification. This WARRANTY is VOID if the unit shows evidence of

havingbeentampered with or shows evidence of having been damaged as a result of

excessivecorrosion;or current, heat, moisture or vibration; improper specification;

misapplication;misuseor other operating conditions outside of OMEGA’s control.

Componentswhichwear are not warranted, including but not limited to contact points,

fuses,andtriacs. OMEGAispleased to offer suggestions on the use of its various

products.However, OMEGA neither assumes responsibility for any omissions or

errorsnorassumes liability for any damages that result from the use if its products in

accordancewithinformation provided by OMEGA, either verbal or written. OMEGA

warrantsonlythat the parts manufactured by it will be as specified and free of

defects.OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONSOF

ANYKINDWHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OFTITLE,

ANDALLIMPLIED WARRANTIES INCLUDING ANY WARRANTYOF MERCHANT-

ABILITYANDFITNESS FOR A PARTICULARPURPOSE ARE HEREBY DIS-

CLAIMED.LIMITATION OF LIABILITY: The remedies of purchaser set forth herein

areexclusive,and the total liability of OMEGA with respect to this order, whether

basedoncontract, warranty, negligence, indemnification, strict liability or otherwise,

shallnotexceed the purchase price of the component upon which liability is based.

Innoevent shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS:Equipmentsold by OMEGA is not intended to be used, nor shall it be

used:(1)as a “Basic Component” under 10 CFR 21 (NRC), used in or with any

nuclearinstallationor activity; or (2) in medical applications or used on humans.

ShouldanyProduct(s) be used in or with any nuclear installation or activity, medical

application,usedon humans, or misused in any way, OMEGA assumes no

responsibilityasset forth in our basic WARRANTY / DISCLAIMER language, and,

additionally,purchaserwill indemnify OMEGA and hold OMEGA harmless from any

liabilityordamage whatsoever arising out of the use of the Product(s) in such a

manner.

Directallwarranty and repair requests/inquiries to the OMEGA Customer Service

Department.BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER

MUSTOBTAINAN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S

CUSTOMERSERVICEDEPARTMENT (IN ORDER TOAVOID PROCESSING

DELAYS).The assigned AR number should then be marked on the outside of the

returnpackagean on any correspondence.

FORWARRANTYRETURNS, ForNON-WARRANTY REPAIRS,

pleasehavethe following information consultOMEGA for current repair

availableBEFOREcontacting OMEGA: charges. Havethe following information

1.Purchase Order number under which availableBEFORE contacting OMEGA:

theproductwas PURCHASED, 1.Purchase Order number to cover the

2.Model and serial number of the COSTofthe repair/calibration

productunderwarranty, and 2.Modeland serial number of the

3.Repair instructions and/or specific product,and

problemsrelativeto 3.Repair instructions and/or specific

problemsrelativeto the product.

OMEGA’spolicyisto make running changes, not model changes, whenever an improvement is possible.

Thisaffordsour customers the latest in technology and engineering.

OMEGAisa registered trademark of OMEGAENGINEERING, INC.

photocopied,reproduced,translated, or reduced to any electronic medium or machine-readable form, in

wholeorin part, without the prior written consent of OMEGA ENGINEERING, INC. Itisthepolicy of

OMEGAtocomply with all worldwide safety and EMC / EMI regulations that apply. OMEGA is constantly

pursuingcertificationof its products to the European New Approach Directive. OMEGAwilladdthe CE

marktoevery appropriate device upon certification. Theinformationcontainedin this document is believed

tobecorrect, but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the

righttoalter the specifications without notice. WARNING:Theseproductsare not designed for use in, and

shouldnotbe used for, patient connected applications.