One for All (URC-8910)

For example,to enter the first GE VCR code (on

page17), press 0twice,6 once, 0once,and then

SELECTonce.

Ifthe code is entered correctly,you will see the

[SUCCESS]message.

6. Press EXITto exit the programming mode.You will

see an [EXIT SETUP]message as the URC-8910

remote control returns to normal operation.

7. To verify the code works,aim the URC-8910 remote

control at the desired device,press its device key

once and then press POWERonce. T he de vice should

turn off.If it does not respond,repeat steps 2

through 6,trying each code for your brand until you

find one that works.If it still does not work,try

Searching For Yo ur Codeon page 27.

NOTE:If the device does not have a

POWER

key,press the

(

Play

) key.

8. Repeat steps 1 through 7 for each device you want

to control.For future reference,write down each

working device code in the boxes below:

TVCode:

VCRCode:

DVDCode:

SATCode:

CBLCode:

RCVR/AMP

Code:

CDCode:

AUXCode:

Aux.Device

Type:________________________________