One for All (URC-8910) RE-ASSIGNING DEVICE KEYS

RE-ASSIGNING DEVICE KEYS

The URC-8910 remote control can control a second TV,VCR,DVD

player,or other device by using the Mode Mapfeature. For example,

to control a TV,a cable converter,and two VCRs,you will need to re-

assign the unused AUXkey to operate the second VCR as follows:

1. On the URC-8910 remote control,press and hold

SETuntil you see the display change from the cur-

rent device and time to [CODE SET].

NOTE:The device, its code,and time are examples.Your

remote control settings may be different.

NOTE:To exit programming at any time,press

EXIT

once or

allow 30 seconds ofinactivity to lapse.You will see

[EXIT

SETUP]

as the remote control returns to normal operation.

NOTE:

[INVALID]

means you have inadvertently pressed an

incorrect key.Note your error and continue programming.

2. Press the ▼key seven times until you see the display

change to [MODE MAP].

(x 7)

NOTE:If you go past

[MODE MAP]

,press the

▲

key one or

more times to return to it.

3. Press SELECTonce to begin programming.You will

see the display change to [FROM MODE].

4. Select a mode to be copied (e.g.,VCR) and press it

once.You will see the display change to [TO MODE].

5. Select a mode to be re-assigned (e.g.,AUX) and

press it once.You will see the display change to

[SUCCESS],followed by [EXIT SETUP].The URC-8910

remote controlwill automatically exit the program-

ming mode and return to normal operation.

6. The AUXkey is now ready to be programmed as

your second VCR.(See Setting Up Your Components

on page 10.)

continued on next page...

SELECT