One for All (URC-8910) RESTORING FACTORY DEFAULT SETTINGS

RESTORING FACTORY DEFAULT SETTINGS

The URC-8910 remote control includes an Operation Resetprogram

that you can use to restore the unit to factory default settings.

IMPORTANT:Executing this program will erase all custom settings,

including Home Theater assignments,Macros,Learned Keys, Keymoved

Keys,and all device assignments.

1. On the URC-8910 remote control,press and hold

SETuntil you see the display change from the cur-

rent device and time to [CODE SET].

NOTE:The device, its code,and time are examples.Your

remote control settings may be different.

NOTE:To exit programming at any time,press

EXIT

once or

allow 30 seconds ofinactivity to lapse.You will see

[EXIT

SETUP]

as the remote control returns to normal operation.

NOTE:

[INVALID]

means you have inadvertently pressed an

incorrect key.Note your error and continue programming.

2. Press the ▲key twice until you see the display

change to [OPS RESET].

(x 2)

NOTE:If you go past

[OPS RESET]

,press the

▼

key one or

more times to return to it.

3. Press SELECTonce to begin programming.You will

see the display change to [CLR SETUP].

4. Press SELECTonce to start the process.You will see

the display change to [RESET RAM]as the active

memory is cleared,followed by [RESET E2] as the

preprogrammed memory is restored.

Then you will see [EXIT SETUP] as the URC-8910

remote control automatically exits the programming

mode and returns to normal operation.

SELECT