One for All (URC-8910) Programming Volume Unlock

Programming Volume Unlock
1. On the URC-8910 remote control,press and hold
SETuntil you see the display change from the
current device and time to [CODE SET].
2. Press the ▼key five times until you see the display
change to [VOL UNLOCK].
(x 5)
NOTE:If you go past [VOL UNLOCK] ,press the ▲ key one or
more times to return to it.
3. Press SELECTonce to begin programming.You will
see the display change to [ALL MODE].
To unlock one mode,skip to step 4.Otherwise press
SELECTonce to unlock all modes.You will see the
display change to[UNLOCKED] and then [EXIT SETUP]
as the remote control automatically exits the pro-
gramming mode and returns to normal operation.
4. (Optional) Press ▲(or ▼) once.You will see the
display change to [ONE MODE].
or
a. Press SELECTonce.You will see the display change
to[SEL MODE].
b.Press a mode key once (e.g., TV) to unlock it.
You will see the display change to [UNLOCKED]
and return to [SEL MODE].
c. If desired,repeat step 4b as needed to unlock
volume controls for other devices.Otherwise,
press EXITto exit the programming mode.You
will see an [EXIT SETUP]message as the remote
control returns to normal operation.
SELECT
33