One for All (URC-8910)

6. (Optional) Skip this step ifyour TV/VCR Combo

does nothave a separate TV code. Otherwise,press

TVonce.You will see the display change to [TV]and

its current code.

Use the keypad to enter the separate TV code for

your device.

7. Press EXITto exit the programming mode.You will

see [EXIT SETUP]as the URC-8910 remote control

returns to normal operation.

8. To verify the code works,aim the URC-8910 remote

control at the desired device,press VCRonce and

then press POWERonce.The TV/VCR Combo

should turn off. If it does not respond, repe at steps 2

through 8,trying each code for your brand until you

find one that works.If it still does not work,try

Searching For Yo ur Codeon page 27.

NOTE:If the device does not have a

POWER

key,press the

(

Play

) key.

NOTE:For VCR/TV Combos programmed with separate TV

codes,TV volume is controlled by pressing VCRfirst and

then TV.After that,use

VOL+

(or

VOL-

) to raise (or lower)

the TV volume.For other alternatives on controlling volume

keys,see “Changing Volume Lock”on page 32 or “Using

Keymover”on page 38.

9. For future reference,write down the working

TV/VCR combo code in the below boxes:

TV/VCRCode:

TVCode

(ifused):