One for All (URC-8910) USING KEYMOVER

USING KEYMOVER

Restoring A Single Keymoved Key (continued)

2. Press SELECTonce to clear the key m oved key. You

will see [DELETED]appear in the display,followed by

[EXIT SETUP].The URC-8910 remote controlwill

automatically exit the programming mode and

return to normal operation.

Restoring All Keymoved Keys In A Single Mode

1. Perform steps 1 through 4 ofthe earlier section,

Programming Keymoveron page 38. However,this

time in steps 3 and 4,make the source mode and

source key the same mode (e.g.,TV).You will see the

display change to [CLR KMVR].

2. Press SELECTonce to clear al l keymoved keys from

this mode.You will see [DELETED]appear in the

display,followed by [EXIT SETUP].The remote control

will automatically exit the programming mode and

return to normal operation.

SELECT