Configuring the DV-SP506—Continued

Change the Security Code

To change the Security Code, confirm your existing code then enter a new one.

1

Select “Operation Setting” menu

 

 

in the setup.

 

 

2

Use the Up/Down [ ]/[ ] buttons

 

Remote

to select “Security Code,” and

then press the [ENTER] button.

controller

 

The security code input screen appears.

3

Enter the existing security code

 

Remote

using the remote controller’s

number buttons, and then press

controller

 

the [ENTER] button.

 

The default security code is “8888.”

 

Even if a new security code has been

 

entered, the code “8888” can still be

 

used.

 

Once the security code has been

 

entered, the new security code input

 

screen appears.

4

Enter the new security code

 

Remote

using the remote controller’s

number buttons, and then press

controller

 

the [ENTER] button.

 

The new security code has been set.

Note:

If you forget your security code, enter “8888” instead. “8888” is a security code that can always be used.

DVD Priority Contents

This setting determines what is played when a DVD-Audio disc also contains DVD-Video material.

DVD-AUDIO (default): The DVD-Audio material is played.

DVD-VIDEO:The DVD-Video material is played.

SACD Priority Contents

SACDs have two separate areas for storing audio tracks—one for multichannel audio, the other for 2- channel stereo audio. In addition, hybrid SACDs have an extra layer for playback in standard CD players.

With this setting you can determine how SACDs are played by the DV-SP506.

Multi ch Area (default): The multichannel audio

tracks are played.

2 ch Area: The 2-channel stereo audio tracks are played.

CD Area: The CD layer of hybrid SACDs is played.

Note:

This setting determines which area of the disc is played initially. If Multi ch Area is selected, and an SACD that contains no multichannel area is loaded, the 2-channel area will be played.

HDMI Control

With this setting, you can turn RIHD control over HDMI on or off.

On (default): RIHD control on.

Off: RIHD control off.

Notes:

RIHD (Remote Interactive over HDMI) is Onkyo’s implementation of CEC (Consumer Electronics Con- trol), which allows integrated system control over HDMI and is part of the HDMI standard. In addition to Onkyo AV components, it allows interoperability with CEC-compatible AV components and TVs made by other manufacturers. However, operation with components other than RIHD-compatible components or recommended components cannot be guaranteed.

Select Off if a connected component is incompatible or you’re not sure about its compatibility.

If operation is unreliable when set to On, select Off instead.

When you set the RIHD function, set the HDMI Out- put setting (see page 49) to “On.”

57

Page 57
Image 57
Onkyo DV-SP506 instruction manual Change the Security Code, DVD Priority Contents, Sacd Priority Contents, Hdmi Control