Preout to External Amplifier

`No

`Surr Back, Front High, Front Wide

For 9.2-channel playback, select the channel output by SB/FH/FW EXT AMP jacks. If you select speakers whose setting in Speaker Configuration is set to “None”, it will be automatically switched to “80Hz (THX)”.

Note

If the “Speakers Type(Front)” setting is set to Bi-Amp or “Digital Crossover”, Powered Zone 2 cannot be used.

When the “Powered Zone 2” setting is set to “Yes” and Zone 2 is turned on, the surround back and front high speakers cannot be used.

When the “Powered Zone 2” setting is set to “Yes”, the front wide speakers cannot be used.

If the “Powered Zone 2” setting is set to “No”, the “Powered Zone 3” setting cannot be selected.

Preout to External Amplifier” is not available in either of the following cases:

The “Speakers Type(Front)” setting is set to Bi-Amp or “Digital Crossover”.

The “Powered Zone 2” setting is set to “Yes”.

Speaker Configuration

This setting is set automatically by

Audyssey MultEQ® XT32 Room Correction and Speaker Setup (page 39).

With these settings, you can specify which speakers are connected and a crossover frequency for each speaker. Specify “Full Band” for speakers that can output low frequency bass sounds adequately, for example, speakers with a good sized woofer. For smaller speakers, specify a crossover frequency. Sounds below the crossover frequency will be output by the subwoofer instead of the speaker. Refer to your speaker’s manuals to determine the optimum crossover frequencies. If you set up your speakers using Audyssey MultEQ XT32 Room Correction and Speaker Setup, please make sure manually that any THX speakers are set to “80Hz(THX)” crossover.

Subwoofer

`1ch:

Audio signal is outputted from SW1 jack only.

`2ch:

Audio signal is outputted from SW1 and SW2 jacks.

`No

Front

`Full Band

`40Hz, 45Hz, 50Hz, 55Hz, 60Hz, 70Hz, 80Hz(THX), 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz, 200Hz

Note

If the “Subwoofer” setting is set to “No”, the “Front” setting is fixed at “Full Band”.

Center*1, Surround*1*2

`Full Band

`40Hz, 45Hz, 50Hz, 55Hz, 60Hz, 70Hz, 80Hz(THX), 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz, 200Hz

`None

En-64

Advanced Operations

Front Wide*1*3*4*6*8, Front High*1*3*5*6*7*8

`Full Band

`40Hz, 45Hz, 50Hz, 55Hz, 60Hz, 70Hz, 80Hz(THX), 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz, 200Hz

`None

Surround Back*1*3*5*6*8

`Full Band

`40Hz, 45Hz, 50Hz, 55Hz, 60Hz, 70Hz, 80Hz(THX), 90Hz, 100Hz, 110Hz, 120Hz, 130Hz, 150Hz, 200Hz

`None

Note

*1 Full Band” can be selected only when “Full Band” is selected in the “Front” setting.

*2 When the “Powered Zone 3” setting is set to “Yes” and Zone 3 is turned on, this setting cannot be selected.

*3 This setting cannot be selected if the “Speakers Type(Front)” setting is set to Bi-Amp or “Digital Crossover”.

*4 When the “Powered Zone 2” setting is set to “Yes”, this setting cannot be selected.

*5 When the “Powered Zone 2” setting is set to “Yes” and Zone 2 is turned on, this setting cannot be selected.

*6 If the “Surround” setting is set to “None”, this setting cannot be selected.

*7 When the “Powered Zone 3” setting is set to “Yes”, this setting cannot be selected.

*8 If the “Preout to External Amplifier” setting is enabled for these speakers, “None” cannot be selected.

Page 64
Image 64
Onkyo TX-NR1010 instruction manual En-64

TX-NR1010 specifications

The Onkyo TX-NR1010 is a robust and versatile AV receiver that epitomizes the integration of cutting-edge technology with user-friendly functionality, making it an ideal choice for audio enthusiasts and casual listeners alike. This receiver stands out in the crowded home theater market due to its impressive features and specifications.

One of the standout characteristics of the TX-NR1010 is its advanced audio processing capabilities. It supports a variety of high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. The receiver is equipped with a 9.2 channel configuration, providing a powerful output of 135 watts per channel. This configuration allows immersive surround sound environments and the flexibility to set up advanced audio formats such as Dolby Atmos and DTS:X for three-dimensional soundscapes.

The TX-NR1010 incorporates Onkyo’s proprietary WRAT technology, which ensures low distortion and superior sound clarity. This technology enhances the receiver's performance across all audio sources, from music playback to movie soundtracks, ensuring that users experience the full range of dynamic sound. Moreover, the receiver features a high-current amplification system that delivers precise and robust audio reproduction.

In the realm of connectivity, the TX-NR1010 excels with multiple HDMI inputs that support 4K video pass-through and scaling. This allows for seamless connection to a wide range of devices, such as Blu-ray players, gaming consoles, and streaming devices. The receiver also offers networking features, including Wi-Fi and Ethernet connectivity, enabling users to stream music directly from services like Spotify, Pandora, and others.

The Onkyo TX-NR1010 is compatible with the Onkyo Remote App, which allows users to control the receiver from their smartphones or tablets, enhancing ease of use. The inclusion of the Audyssey MultEQ XT technology for room correction ensures that the audio performance is optimized for any room size or shape, adjusting the acoustics based on the listening environment.

Design-wise, the TX-NR1010 sports a sleek, modern aesthetic with a user-friendly interface. Its front panel features a clear display and intuitive controls, making it easy to navigate through settings and options.

Overall, the Onkyo TX-NR1010 is a powerful and feature-rich AV receiver that delivers exceptional sound quality, versatile connectivity options, and advanced technologies tailored for an immersive audio experience. This receiver is an excellent investment for both home theater setups and multi-room music systems.