Using Easy Macros
By using ACTIVITIES in Easy macro mode, you can sequentially operate Onkyo components via simple commands from a
These commands are
1 Press ACTIVITIES (MY MOVIE, MY TV, or
MY MUSIC) to start the Easy macro command.
The default sequences of actions are described below. To change the related source component, see “Changing the Source Components” shown later in this chapter.
■MY MOVIE
First, the TV, the Onkyo
*1 Depending on the
■MY TV
First, the TV, the cable
■MY MUSIC
The Onkyo CD player and the AV receiver are turned on. The input selector is set to “TV/CD”. Finally, the player starts playback.
Note
•While the Easy Macro command is being processed, you cannot use other ACTIVITIES. If you want to operate other components, first press ALL OFF and use the desired ACTIVITIES.
Turning Off the Components
This button turns off all components activated by the Easy Macro mode.
1 Press ALL OFF.
First, the related components stop and turn off. Second, the AV receiver turns off. Finally, the TV turns off (or enters standby mode).*1*2
*1 This step doesn’t apply to MY MUSIC, with the default settings.
*2 With some televisions, the power may not be turned off (or enter standby mode).
Changing the Source Components
You can change the source components activated by the Easy Macro mode.
1 While holding down REMOTE MODE for the playback component you wish to assign, press and hold down the ACTIVITIES to be changed
(MY MOVIE, MY TV, or MY MUSIC) (about 3
seconds).
ACTIVITIES flashes twice, indicating that the change is complete.
Examples:
If you wished to use MY MUSIC to start the Onkyo cassette recorder, you would press and hold down
MY MUSIC (about 3 seconds) while holding down TV/CD until it flashes twice.
Turning On & Basic Operations
Restoring Default
You can restore ACTIVITIES to the default settings.
1 | While holding down HOME, press and hold down |
| ALL OFF until ALL OFF lights (about 3 seconds). |
2 | Release HOME and ALL OFF, and press ALL OFF |
| again. |
ALL OFF flashes twice.
