Controlling Other
Components
You can use the AV receiver’s remote controller to control your other AV components, including those made by other manufacturers. This section explains how to enter the remote control code for a component that you want to control: DVD, TV, CD, etc.
See “Learning Commands” for learning commands directly from another component’s remote controller (➔ page 95).
See “Using Normal Macros” for programming ACTIVITIES to perform a sequence of remote control actions (➔ page 96).
Preprogrammed Remote Control Codes
The following REMOTE MODE buttons are preprogrammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.
For details on controlling these components, see the indicated pages.
BD/DVD Onkyo
STB/DVR Apple TV
Looking up for Remote Control Codes | 8 |
You can look up for an appropriate remote control code from the
9
You need to connect your TV to the HDMI output
(HDMI OUT MAIN) to make the following
1 | Press RECEIVER followed by HOME. |
2 | Use e/rto select “Setup”, and then press ENTER. |
3 | Use q/wto select “Remote Controller Setup”, and |
| then press ENTER. |
4 | Use q/wto select “Remote Mode Setup”, and then |
| press ENTER. |
5 | Use q/wto select a remote mode, and then press |
| ENTER. |
| The menu of category selection appears. |
6 | Use q/wto select a category, and then press |
| ENTER. |
| The keyboard screen for brand name input appears. |
7 | Use q/w/e/rto select a character, and then press |
| ENTER. |
Repeat this step for the first three characters of the brand name.
When you have entered the 3rd character, select “Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use rto select “Not Listed”, and then press
ENTER.
The keyboard screen for brand name input appears.
Controlling Other Components
Use q/wto select a brand, and then press ENTER.
A remote control code with its instructions are displayed. Follow the procedure.
If you can control the component, use q/wto select “OK”, and then press ENTER.
The
If you cannot control the component, use q/wto select “Try Next Code” and press ENTER.
The next code is displayed.