Playing the connected source
MASTER VOLUME dial
SP A
SP B
Input Selector
SPEAKERS A/B | Input Selector buttons | buttons |
VOLUME 5/∞
This section shows you how to play the sources connected to the AV Receiver.
You may need to see “Connecting to audio/video equipment” on page 10 while following the steps in this section.
Selecting a sound source
1.Press input selector button to select one of the following input sources:
•DVD
•VIDEO 1
•VIDEO 2
•VIDEO 3
•TAPE
•CD
e.g. When VIDEO 3 is selected.
Volume level
About digital sound
If the equipment is digitally connected to the AV Receiver, the sound from the digital input will automatically be selected and reproduced instead of the analog sound as explained below.
The initial settings are as follows:
•When the DVD source is selected, the digital sound from the DIGITAL INPUT COAXIAL connector is reproduced.
•When the CD source is selected, the digital sound from the DIGITAL INPUT OPTICAL 2 connector is reproduced.
•When the TAPE source is selected, the digital sound from the DIGITAL INPUT OPTICAL 1 connector is reproduced.
When the digital sound is reproduced, the ŸDIGITAL, DTS, or PCM (2 channel digital stereo) indicator lights up according to the received sound system in the AV Receiver’s display.
ŸDIGITAL PCM
DTS
When MD recorder is connected to the TAPE jacks, you can switch the source from TAPE to MD (see page 23).
2.Ensure that the indicator(s) for the speaker system(s) to be used are lit on the display.
If no SPEAKERS indicator is lit, press SPEAKERS A/B on the unit or SP A/SP B on the remote controller to select the speaker system(s) to be used.
Various functions while playing the connected source
To use the following functions, see pages 26 and 27.
•Turning on/off the SPEAKERS A/SPEAKERS B systems
•Muting the sound
•Listening through headphones
•Changing the display
•Controlling the brightness of the lghts on the AV Receiver
•Using the sleep timer
3.Start playing the selected source.
4.Press VOLUME 5/∞ on the remote controller or turn MASTER VOLUME dial on the unit to adjust the volume.
Enjoying the surround modes while playing the connected source
See page 30.
21
