Onkyo TX-SR500 Using remote controller, Controlling an Onkyo DVD player, DVD operation buttons

Using remote controller

You can operate the z-connected Onkyo DVD player, CD player or cassette tape deck with the remote controller provided with the TX-SR500/TX-SR500E. The graied buttons in the illustration operates the TX-SR500/TX-SR500E in any mode. The RC-478M remote controller is for USA and Canadian models, and the RC-479S remote controller is for other models.

Controlling an Onkyo DVD player

DVD operation buttons

RC-479S

DVD

OSD operation buttons

DVD operation

buttons

RC-478M

The zconnector of the Onkyo DVD player must be connected to the TX-SR500/TX-SR500E (refer to page 16).

1. Press DVD.

DVD 2. Press to turn on the Onkyo DVD player.

3. Press the desired operation button.

OSD	DVD operation buttons
operation	s:	Starts playback of DVD.
buttons	e:	Stops playback.
	f:	Searches the disc in the forward
		direction.
	d:	Searches the disc in the reverse
		direction.
	2/8 :	Lets playback pause temporarily or
		advances the disc frame by frame.
	w:	Starts playback from the beginning of
		the next chapter/track.
	q:	Starts playback from the beginning of
		the current chapter/track.
	DISC :	This button is valid when the DVD
		changer is used and selects the disc to
		be played.
	1–9, +10, 0 : Use to enter numeric values.
	OSD operation buttons
	TOP MENU : Displays the top menu of each DVD
	disc.
	MENU :		Displays a menu recorded in the
	DVD disc.
	RETURN :		Returns to the previous menu.
	SETUP :		Displays the setup menu.
	5/∞/2/3 :		Selects an item in a menu.
	ENT :		Enters the selection in memory.

34