Input Setup
b. Component Video
The video signal from the input jacks set at the “b. Component Video” setting is output to the COMPONENT VIDEO OUT jacks. Use this setting if you connect monitors like TV to the COMPONENT VIDEO OUT jacks on the
For example, when you connect the DVD player to the COMPONENT VIDEO INPUT 1 jacks, select “DVD” as input source and set “b. Component Video” to “INPUT 1.”
The default settings are given below.
Input source selected | Component video input |
|
|
CD | Last |
|
|
PHONO* | Last |
|
|
TUNER | Last |
|
|
TAPE | Last |
|
|
DVD | INPUT 1 |
|
|
VIDEO1 | INPUT 2 |
|
|
VIDEO 2 | INPUT 2 |
|
|
VIDEO 3 | INPUT 2 |
|
|
VIDEO 4 | INPUT 2 |
|
|
*
INPUT 1: Selects when the video device is connected to the COMPONENT VIDEO INPUT 1 jacks.
INPUT 2: Selects when the video device is connected to the COMPONENT VIDEO INPUT 2 jacks.
Last: Select to have the video of the previous input source continued.
c. IntelliVolume
This setting allows you to adjust for the volume differences between your various input source components.
When switching input sources, you may find that the output level for different components or input sources connected to the TX- SR701/701E/601/601E is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This Intelli Volume setting allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the
cursor button, and if it is louder than that of other sources, decrease it with the 
cursor button.
The IntelliVolume can be adjusted between
53
