Onkyo TX-SR601E, TX-SR701E instruction manual Specifications TX-SR701/701E, Amplifier Section

Continuous power output (DIN) Maximum power output (EIAJ) Dynamic power output (stereo)

Total harmonic distortion: IM distortion:

Damping factor:

Input sensitivity and impedance

PHONO:

LINE (CD, TAPE, DVD, VIDEO 1-4):

MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R):

(SUBWOOFER):

COAXIAL (DIGITAL):

DVD, VIDEO 1, 2, 3, 4:

COMPONENT VIDEO 1, 2:

Output level and impedance Rec out (TAPE, VIDEO 1, 2): Line out:

Pre out:

VIDEO (VIDEO 1, 2,

MONITOR OUT):

COMPONENT VIDEO OUT:

Phono overload: Frequency response:

RIAA deviation: Tone control

Bass:

Treble:

Signal-to-noise ratio (stereo) Phono:

Line:

Muting:

78

Specifications (TX-SR701/701E)

AMPLIFIER SECTION

Continuous average power output (FTC)

All channels:100 W per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion.

125 W min. RMS at 6 Ω, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion. 130 W at 6 Ω

160 W at 6 Ω

2 ⋅ 230 W at 3 Ω

2 ⋅ 170 W at 4 Ω

2 ⋅ 115 W at 8 Ω

0.08% at rated power

0.08% at 1 W output

0.08% at rated power

0.08% at 1 W output

60 at 8 Ω

2.5 mV, 47 kΩ

200 mV, 47 kΩ

200 mV, 47 kΩ

36 mV, 47 kΩ

0.5 Vp-p, 75 Ω

1 Vp-p, 75 Ω

1 Vp-p, 75 Ω (Y)

0.28 Vp-p, 75 Ω (C)

1 Vp-p, 75 Ω (Y)

0.7 Vp-p, 75 Ω (PB, PR)

200 mV, 470 Ω

100 mV, 470 Ω (Zone 2)

1 V, 470 Ω

1 Vp-p, 75 Ω

1 Vp-p, 75 Ω (Y)

0.28 p-p, 75 Ω (C)

1 Vp-p, 75 Ω (Y)

0.7 Vp-p, 75 Ω (PB, PR)

70 mV RMS at 1 kHz, 0.5% T.H.D.

10 Hz to 100 kHz: +1/–3 dB (CD in Direct mode)

20 Hz to 20 kHz: ±0.8 dB

±10 dB at 50 Hz

±10 dB at 20,000 Hz

80 dB (IHF A, 5 mV input, Direct mode)

106 dB (IHF A, 0.5 V input, Direct mode) –50 dB

TUNER SECTION
FM
Tuning range:
USA & Canadian models:	87.50–108.00 MHz (100-kHz steps)
Other area models:	87.50–108.00 MHz (50-kHz steps)
Usable sensitivity	11.2 dBf, 1.0 µV (75 Ω IHF)
Mono:
	0.9 µV (75 Ω DIN)
Stereo:	17.2 dBf, 2.0 µV (75 Ω IHF)
	23 µV (75 Ω DIN)
50 dB quieting sensitivity	17.2 dBf, 2.0 µV (75 Ω)
Mono:
Stereo:	37.2 dBf, 20 µV (75 Ω)
Capture ratio:	2.0 dB
Image rejection ratio
USA & Canadian models:	40 dB
Other area models:	85 dB
IF rejection ratio:	90 dB
Signal-to-noise ratio
Mono:	76 dB
Stereo:	70 dB
Alternate channel attenuation:	55 dB
Selectivity:	50 dB (DIN)
AM suppression ratio:	50 dB
Total harmonic distortion
Mono:	0.2%
Stereo:	0.3%
Frequency response:	30 Hz–15 kHz, ±1.0 dB
Stereo separation:	45 dB at 1 kHz
AM	30 dB at 100 Hz–10 kHz
Tuning range
USA & Canadian models:	530 to 1,710 kHz (10-kHz steps)
European & Australian models:	522 to 1,611 kHz (9-kHz steps)
Worldwide models:	522 to 1,611 kHz (9-kHz steps)
	530 to 1,710 kHz (10-kHz steps)
Usable sensitivity:	30 µV
Image rejection ratio:	40 dB
IF rejection ratio:	40 dB
Signal-to-noise ratio:	40 dB
Total harmonic distortion:	0.7%
GENERAL
Power supply
USA & Canadian models:	AC 120 V, 60 Hz
European & Australian models:	AC 230–240 V, 50 Hz
Some Asian models:	AC 220–230 V, 50/60 Hz
Worldwide models:	AC 220–230 and 120 V switchable,
	50/60 Hz
Power consumption
USA & Canadian models:	6.0 A
Other models:	620 W
Dimensions (W ⋅ H ⋅ D):	435 ⋅ 175 ⋅ 431.5 mm
	17-1/8" ⋅ 6-7/8" ⋅ 16-15/16"
Weight
USA & Canadian models:	26.9 lbs.
Other models:	13.0 kg
REMOTE CONTROLLER
Transmitter:	Infrared
Signal range:	Approx. 16 ft., 5 meters
Power supply:	Two “AA” batteries (1.5 V ⋅ 2)

Specifications and features are subject to change without notice.