Auto Zooming Tracking Dome Camera User Manual
A zone is pan area, defined by a left and right limit on the
TO program a zone:
(1)Move joystick to position the cursor beside ZONE NUMBER. Press iris Open.
(2)Move the joystick up or down to view selections. Press iris Open to confirm selection.
(3)Move joystick to position the cursor beside EDIT ZONE.
(4)Press iris Open. The Zone programming window will show on the monitor.
(5)Follow the directions displayed on the monitor. After the left stops and right limit stops are set, the Zones menu reappears with the ZONE ENABLED option set to be ON.
To edit a zone label:
(1)Move joystick to position the cursor beside EDIT ZONE LABEL.
(2)Press iris Open. It will show as follows:
|
|
| ZONE NUMBER | 1 |
ZONE LABLE |
| 1 - - - - - |
| |
0 1 2 3 4 5 6 7 8 9 Y Z y z |
| |||
A B C D E F G H I J K L M N O P Q R S T U V W X |
| |||
a b c d e f g h I j k l m n o p q r s t u v w x |
| |||
INPUT MODE |
| CHARACTER |
| |
OK | CN | SP | BP |
|
|
|
|
|
|
Figure 3.15 ZONE SETTING
34
