Manuals / Optiview / Photography / Security Camera

Optiview TRKPTZ -26NX, TRKPTZ-18NX Label Position, Zone Camera Preset Save Reset Azimuthzoom

Models: TRKPTZ -26NX

1 53

Download 53 pages 12.57 Kb

Page 19

3.4.2 Label Position

Auto Zooming Tracking Dome Camera User Manual

ratio label is displayed when zoom is activated. Azimuth/elevation and direction labels are displayed when pan/tilt is activated. The dome label is displayed when the dome label is activated.

The following settings are available foe each label: OFF: The label is not displayed when activated. ON: The label shows when activated.

3.4.2 Label Position

Labels can be placed anywhere on the monitor. This feature enables you to customize the place of labels on monitor screen.

ZONE CAMERA PRESET

SAVE

RESET

AZIMUTHZOOM

Figure 3.4 Label Position

To set a label position:

(1)Move joystick to position the cursor beside a label.

(2)Press iris Open.

(3)Move joystick to move the label up, down, left, or right.

(4)Press iris Open.

(5)Repeat steps 1 through 4 to position other labels.

(6)Move the cursor to Save and press iris Open to save settings and return to display setup menu.

18

Image 19

Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Label Position, Zone Camera Preset Save Reset Azimuthzoom

Contents

Auto Zooming Tracking User ManualDome Cameras Contents 3.8 Other Functions 3.7 Dome Label1.1 Production Introducing Section1 Instruction1.2 Character 1.3 Function Description Page  Targets are in near and far at the same time Auto Zooming Tracking Dome Camera User ManualThe camera will not auto focus in the following status  Target is not in the center of image14 Random Scan 17 Alarms Alarms input 1.4 Specification Comparison Chart 00PT TZ-22f=3.6-82.8mm Pan 360ºContinuousTilt-5º～ 92º Section 2 Normal Operation Section 3 Menu Configuration 1 Move joystick to position the cursor beside menu selection 4 Press iris Close to cancel selectionAuto Zooming Tracking Dome Camera User Manual PTOL：PELCO-D COMM：2400,N,8,1 ADDR：0RESET CAMERA REBOOT SYSTEM LANGUAGE ENGLISH EXIT 3.1 Main Menu3.2 Select Language SYSTEM INFORMATION DISPLAY SETUP DOME SETTINGS DOME SETTINGSSYSTEM INFORMATION 3.3 System InformationFigure 3.2 SYSTEM INFORMATION 3.4 Display Setup 3.4.1 Display Setup ZONE CAMERA PRESET SAVE RESET AZIMUTHZOOM 3.4.2 Label PositionPRESET NUMBER 256 BACK EXIT 3.5 Dome Settings 3.5.1 Dome Settings3.5.2 Camera Settings DOME SETTINGS1 CAMERA MOTION POWER UP PRESETS PATTERNS ZONES CLEARZoom limit enables you to define a limitation on zooming times 3.5.2.1 Program AE ModeLOW LIGHT MODE AE MODEBRIGHT LEVEL LOW LIGHT LIMITIRIS LEVEL AGC LEVELLOW LIGHT LIMIT 3.5.2.2 Other MenuIR CUT FILTER SHUTTERAUTO IRIS AUTO WHITE BALANCE AUTO SHARPNESSAUTO FILP 3.5.3 Motion SettingPARK TIME PROPORTIONAL PANPARK ACTION SET MANUAL LIMIT SCAN SPEEDSET SCAN STOPS CLEAR SCAN STOPSCLEAR AZIMUTH ZERO 3.5.4 Power UpPOWER UP ACTION SET AZIMUTH ZEROPRESETS PRESET NUMBER1 …PRESET NOT DEFINEO… EDIT PRESET LABEL 3.5.5 Presets SettingEDIT PRESET SCAENE CLEAR PRESET BACK EXIT 2 Edit preset label 1 Select preset numberPROGRAME PATTERN 3.5.6 Patterns Setting3 Edit preset scene 4 Clear a presetCLEAR PATTERN 3.5.7 Zone SettingTo edit a zone label TO program a zoneFigure 3.15 ZONE SETTING To clear a zone 3.5.8 Clears SettingCLEAR ZONES RESTORE FACTORY DEFAULTS 3.5.9 Presets Number3.6 Dome Settings 2 Menu CLEAR PRESETSSEQUENCESECS 3.6.1 AlarmsALARM NUMBER RESET DELAYSECSSelect alarm number 3.6.2 Alarms SettingSelect alarm priority Set alarm action Set alarm contact 3.6.3 Aux SettingSet auxiliary to activate 3.6.4 Password Setting ENABLE PASSWORD Style 3.6.5 Windows BlankingBlanking Parameters 3.6.6 Set WindowsOperation 3.6.7 Edit Windows LocationEDIT WINDOWS IRIS OPEN TO CONTINUE IRIS CLOSE TO CANCEL 3.6.8 Edit Windows ZoomEDIT WINDOW LOCATION HEATER MODE 3.6.9 Heater SettingTEMPERATURE SET HEATER DISPLAY3.6.10 Cruise Setting 3.6.11 Tracking Setting 2. Press Open 3. Move joystick to select desired parameter Auto Zooming Tracking Dome Camera User ManualOperations 1. In the menu of Fig 3.30, move joystick to a specific item3.6.12 Tracking Boundary 3.8 Other Functions RESET CAMERAREBOOT SYSTEM 3.7 Dome Label