Optoma Technology HD3000 manual Image Mode, Mode Description

HD3000 User’s Guide

Professional Video Scaler and Color Management System

Image Mode

For easy, care-free operation, HD3000 comes with preset image modes. Once the front- end is correctly fine tuned in SETUP and IMAGE, user can simply switch among the pre-set modes to have different image effects.

1.Use “h”, “i” arrow keys to select the “Image Mode” adjustment item, press “Enter” key or “g” key to enter this adjustment item. The OSD disappears and only displays a small adjustment bar (as shown below).

2.Use “f”, “g” arrow keys to select the preferred image mode. There are 4 preset modes: Film, TV, Linear and one-user modes; each mode is fine tuned for specific desired image performances. Please refer to the following description:

Mode	Description
Film	Simualte a Movie Theater image
	performance, darker with great
	picture depth, more a “film-like”
	experience, suitable for a complete
	dark room enviroment.
TV	Normal mode is brighter, and the
	image is more “TV-like”
Linear	This mode is by pass mode for
	natural image.
User

3.User can select and setup their favorite setting on the “User” mode and an adjust submenu that shows as the following:

Image Mode -User

Output

Level: 1

Value: 25

Reset

Input

4.Use “f”and “g” arrow keys to select a different Input level or select the “reset” function; user may adjust output value by using “h” or “i” in each input level.

HD3000 User’s Guide

42