Optoma Technology HD3000 manual Edge Enhancement, Imagei Advanced

HD3000 User’s Guide

Professional Video Scaler and Color Management System

Edge Enhancement

There are 5 pre-set modes and one user mode for advanced edge enhancement filter. You can easily switch between the modes to achieve different effects.

1.Use “h”, “i” arrow keys to select the “Edge Enhancement” adjustment item, and then press “Enter” key or “g” key to enter this adjustment item. The Menu disappears and a small adjustment bar is shown (as shown below).

IMAGEI ADVANCED

	Noise Reduction		0
IMAGE	Gamma		1
	Color Temp		Warm
	Image Mode		Film
DISPLAY	Edge Enhancement		Off
	Color Vividness		Off
SYSTEM	B/W Extension		Off
	Demo		Off
	Reset
SETUP
	Select	Enter Enter	Back Menu

2.Use “f”, “g” arrow keys to select default modes.

3.For User mode adjustment, put cursor on “User”, and then press “Enter” key to enter this adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown below).

Edge Enhancement Off 1 2 3 4 5 User

4.Use “h”, “i” arrow keys to select and choose “Edge enhancement” bar, and then press “f”, “g” arrow keys to adjust different enhancements.

5.User can select and setup different settings for each mode (1 to 5) in “User” option and adjust submenu shows as the following: When user chooses one mode and presses “Enter” to see the original settings of each item; user may then adjust the value per the original setting of each mode.

HD3000 User’s Guide

45