BASIC OPERATION

Recall feature

Recall feature can be used when you are using some services provided by your network operators such as “call waiting”, etc. A subscription may apply for these services, contact your network operators for more information.

While you are talking on the phone, press R key on the base unit or  /R key on the cordless handset to send a Recall (flash signal).

Call waiting

You can use the recall function to answer a second call while you are on the phone. However this service need to be turned on. For example, to turn on Telstra’s Call Waiting service:

1. Press on the base unit or on the cordless handset to wait for dial tone

then press 43#.

2. You will hear a service tone then press or mentioned above.

Take two different calls at the same time

During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call,

1. Press R key. You will hear a dial tone.

2. Press 2 to put the current call on hold and talk with the second caller.

3. Repeat steps 1-2 to swap between the two callers.

Recall settings are: Australia (100ms, SHORT); New Zealand (600ms, LONG).

If this feature does not work correctly, check the country option. To change the Recall

settings, press and hold /P key on the cordless handset to switch between “LONG” and “SHORT” on the display.

Recall function when connected to a PABX

If you have connected your telephone to a PABX, you can use all the facilities such as call transfer, automatic recall, etc. The R key provides access to these facilities.

13

Page 15
Image 15
Oricom M5500 Series manual Recall feature, Call waiting, Take two different calls at the same time