ANSWERING MACHINE OPERATION

Answering Machine Operation

Answering machine On / Off

During standby mode,

1. Press and hold key to switch the answering machine off.

The voice prompt, “Answering off” can be heard followed by two short beeps.

Note: During Off mode, the answering machine is set to Announcement Two mode automatically. It will answer the call after 12 rings, and then switch to remote control mode.

During Off mode,

1. Press and hold key to switch the answering machine on.

The voice prompt, “Answering on, Announcement One” can be heard followed by a short beep.

OGM (Outgoing Messages)

M5500 has two OGM modes:

OGM1 (Announcement One) mode:

Callers can hear a pre-recorded message “Please leave a message after the beep” and the unit records the caller's message.

OGM2 (Announcement Two) mode:

Callers can hear the other pre-recorded message “Please call later” . Under this mode, the caller will NOT have the opportunity to leave a message.

You can also record your own personalized greeting (from 3 seconds to 120 seconds).

Note: The default setting is OGM1 (Announcement One).

OGM setting

1. You can set the OGM mode in the TAD setting mode (Refer to “answering mode setting” section on P30).

2. Or press key to switch between OGM1 and OGM2.

39

Page 41
Image 41
Oricom M5500 Series manual Answering Machine Operation, Answering machine On / Off, OGM Outgoing Messages, OGM setting