ANSWERING MACHINE OPERATION
Record OGM
1. | Press |
| key to select OGM1 mode or OGM2 mode. |
| |||
2. | Press and hold /ANS key until you hear a | ||
long beep and see Answer/Message light flash. The display on the right is shown.
3. Speak into the microphone (15cm from the base unit’s microphone).
4. Press 
key to stop recording, the machine will play back recording for review.
Note: If the OGM is less than 3 seconds, it is not valid. The machine will stop automatically after 2 minutes.
Play OGM
During standby mode,
1. Press 
/ANS 
key to play the OGM.
2. Press 
key to stop playing and return to standby mode.
Delete OGM
During OGM playing mode,
1. Press 
X 
key to delete the OGM.
2. The machine will return to standby mode after 5 seconds.
OGM play to line
If an incoming call ring exceeds the number of rings setting (Refer to “TAD rings setting” section on P30), the answering machine will pick up the call and play the OGM message. The display on the right is shown.
40
