Operation and setup of the picture frame

Registration

Step1: Select [Registration] icon using the navigator key and press on the photo frame or on the remote control to proceed.

Step2: Select digits using the navigator key and press on the photo frame or on the remote control to input PIN.

Note:

The default PIN is “0000” and the PIN code must be 4 digits.

Step3: Press and hold the key on the base for about 15 seconds.

Step4: Select [Save] icon using the navigator key and press on the photo frame or on the remote control to proceed, the LCD screen will show “Searching…”

If the Photo Frame registration succeeds, the LCD screen will show “OK”.

Ringer Pattern

Step1: Select [Ringer Pattern] icon using the navigator key and press on the photo frame or on the remote control to proceed.

Step2: Select desired ring pattern using the navigator key and press on the photo frame or on the remote control to confi rm.

51

PIX2000 User Guide.indd 章节2:51

2009-6-30 17:33:38

Page 53
Image 53
Oricom PIX2000 manual Ringer Pattern, Registration