Operation and setup of the cordless handset
Operation and setup of the cordless handset
How to make a Call
1.Press the 
or 
key, wait for a dial tone, then dial the desired number.
2.After finishing the conversation, press key 
or place the cordless handset into the charger.
The talk timer will be shown for about 2 seconds before returning to standby mode.
Pre-dialling
1.When the handset is in standby mode, input the desired number.
2.Press 
key to cancel the wrong digit, input the correct digit again.
3.Press the 
or 
key, the number will automatically dial out.
4.After finishing the conversation, press 
key or place the cordless handset into the charger.
The talk timer will be shown for about 2 seconds before returning to standby mode.
How to Adjust the Receiver or Speaker Volume.
While the phone is in talk mode, press 
or 
key on the handset to adjust the receiver or speaker volume of the handset. There are 5 possible volume selections for handset speaker and recveiver. The display will show the current volume level during adjusting.
How To Answer a Call
When the phone rings, the icon 
will fl ash and the LCD on the handset will show “CALL”. If you have subscribed to Caller ID service from your network service provider, the incoming call information will be shown.
1.Press the 
or 
key to answer a call.
2.After finishing the conversation, press 
key or place the cordless handset into the charger.
13
PIX2000 User Guide.indd 章节2:13
