Oricom PIX2000 manual Troubleshooting, Unregistered

							Troubleshooting
Troubleshooting
	Problem	Possible cause(s)			Solution(s)
	No dial tone on	1. The base unit is not		1.		Check CONNECTION to
	the cordless		properly connected.			power and telephone line.
	handset.	2. Too far from the base unit.		2.		Move handset CLOSER to
		3. Battery charge is low.				base unit.
		4. Incorrect battery polarity.		3.		CHARGE battery.
		5. Re-register handset.		4.		RE-INSERT batteries and
						check + and .
				5.		Handset not registered.
	Antenna symbol	1. The handset is not		1.		REGISTER the handset.
	is fl ashing.		registered. If the handset	2.		Move CLOSER to the base
			is unregistered, it displays			unit.
			UNREGISTERED.		3. Check power
		2. The handset is out of			CONNECTION to the base.
			range.
		3. The product is not properly
			connected.
	No beep when	1. The handset is not placed		1.		Lift handset off the
	the cordless		properly on the charger.			charger carefully and
	handset is	2. Charging contacts are				REPOSITION correctly.
	placed on the		dirty.	2.		CLEAN charging contacts
	charger.	3. No power connection to				with a clean and dry cloth.
			base unit.	3.		Check power
		4. The handset’s power is				CONNECTION to the base.
			turned off.	4.		CHECK batteries.
	Handset	1. Handset battery is			1. REPLACE with new AAA
	charged for		defective or faulty.			rechargeable Ni-MH
						batteries.
	24 hours but	2. Handset is not placed		2.
						CHECK to make sure the
	Battery icon		properly on the charger.	3.		battery icon is scrolling.
	remains empty.	3. Battery installed incorrectly.				RE-INSERT batteries and
				4.		check + and .
		4. The product is not properly				Check power
			connected.			CONNECTION to the base.
						59

PIX2000 User Guide.indd 章节2:59

2009-6-30 17:33:39