Orion Car Audio HCCA10004 Amplifier Wiring, 6ENTED %XA PLEMIGH0ASS3ETEAT Z, 0OWERW#ONNECTIONS

6ENTED %XA PLEM(IGH0ASS3ETEAT (Z

Vented enclosures benefit most from the Intelli-Q. Up to 10 dB of boost is capable at the box tuning frequency of 30 Hz. With +10dB of boost, the woofer has more output down to 22 Hz. The excursion below the tuning frequency has been greatly reduced.

Figure 12

Figura 12

Abbildung 12

Figure 13

Figura 13

Abbildung 13

AMPLIFIER WIRING

0OWERW#ONNECTIONS

ssOrion HCCA10002 Fuse Size: 100 Amp.

ssOrion HCCA10004 Fuse Size: 100 Amp.

ssPower connections accept up to 4 AWG wire.

ss4 AWG power and ground wire must be used for optimal per- formance.

ssConnect 12V+ to the battery through a fuse holder. This connec- tion provides +12V main power to the amplifier.

ssPower wire must be fused no more than 12” from battery.

ssGround amplifier to a good chassis ground as close as possible to the amplifier.

ssRecommended fuse is 100A for both amplifiers.

ssConnect REM terminal to remote turn-on lead from source unit. This connection provides +12V power to turn-on the amplifier.

ssAdd extra ground wire between the negative terminal of the battery and the chassis.

NOTE: The addition of a ground wire from the battery to the chassis of the vehicle improves the ability of the battery to supply power to the amplifier. This is recommended because the current delivery of the factory electrical system was designed only to accommodate electron- ics supplied by the auto manufacturer.

© 2009 Directed Electronics. All rights reserved. 11