Orion Car Audio HCCA10004 3PEAKERA#ONNECTIONSC##!, Four Channel Stereo Configuration

3PEAKERA#ONNECTIONSC(##!

The Orion HCCA10004 amplifier offers four positive and four negative output terminals for ease of connecting channel 1(LF), 2(RF), 3(RR), and 4(LR) outputs to the speakers. The amplifier is stable to 2Ω per channel. See diagrams below for possible configurations.

Four Channel Stereo Configuration

ssChannel 1/2 and channel 3/4 lowest recommended impedance is 2Ω stereo.

ssCrossover mode, output, and gain configurations are indepen- dently adjustable between the front and rear channels.

ssTwo-channel or four-channel input can be used for this configu- ration. For source unit fading, use the four-channel input mode.

ssChannels 1/2 and channels 3/4 outputs can be individually config- ured for high-pass, low-pass, or full range operation.

LF LR

RF RR

Figure 17

Figura 17

Abbildung 17

Three Channel Configuration

ssChannels 1/2 are configured for 2-channel stereo operation. ss Channel 1/2 lowest recommended impedance is 2Ω stereo.

ssChannels 3/4 are configured for a single channel bridged out- put.

ssChannel 3/4 lowest recommended bridged impedance is 4Ω.

ssCrossover mode, output, and gain configurations are indepen- dently adjustable between channels 1/2 and 3/4.

ssTwo-channel or four-channel input can be used for this configu- ration. For source unit fading, use the four-channel input mode.

ssChannel 1/2 and 3/4 outputs can be configured for high-pass, low- pass, or full range operation.

ssChannel 3/4 outputs are configured for summed bridged opera- tion for subwoofer.

LF LR

RF RR

Figure 18

Figura 18

Abbildung 18

© 2009 Directed Electronics. All rights reserved. 13