Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame Configure Pictures Menu

MemoryFrame User’s Manual

After you stand the MemoryFrame into the desired position, you will need to select the appropriate choice in the menu option to match the orientation by pushing the Pause/Select ( ) button after highlighting this menu option. Upon selection, your MemoryFrame frame will automatically rotate all its menus and stored slideshow pictures from horizontal to vertical or vice-versa.

9.2.3Picture Configuration Menu

Note: This menu lets you set or change the same settings as the PC Application allows you to set/change. This allows you to use the MemoryFrame without a PC, or change settings originally set with the PC application with the on-board button Menu system. This method is not as fast as the PC.

To enter the Picture Configuration sub-menu, highlight the Picture Configuration Menu entry by using the Forward (►) or Reverse (◄) button and then press the Pause/Select ( ) button.

Important! On any menu that has thumbnail images, the thumbnails will take a few moments to appear, and you will be unable to select a picture or move the highlight until ALL of the thumbnails have appeared in their entirety.

Selecting this menu option will cause the menu being displayed to change from the Main Menu to a sub-menu called the Picture Configuration menu. For this menu, the focus is initially on thumbnails of the stored pictures as depicted in the Figure 18.

CONFIGURATION MENU

PRESS REVERSE, FORWARD, SELECT

Figure 18- Configure Pictures Menu

Copyright© 2002 Pacific Digital Corporation Page 36