Pacific Digital Digital Pacific USB Digital Photo Frame MemoryFrame user manual Getting Started

MemoryFrame User’s Manual

4.Getting Started

The following sections provide step-by-step instructions on setting up your MemoryFrame for the first time.

4.1Unpacking your MemoryFrame™

In the retail box, the MemoryFrame unit is wrapped in a cardboard shock-absorbent holder. Do NOT RIP the “shrink-wrap” portion when removing the unit. Instead, remove the entire cardboard shock-absorbent holder from the box, and unfold the cardboard so that it lies flat. After unfolding the cardboard, you can gently slide the MemoryFrame from out of the “shrink-wrap” material. Next refold the cardboard shock-absorbent holder and place it back in the retail box. Save the box so you can pack or store the unit in the future.

The MemoryFrame MF-570 retail pack includes:

•MemoryFrame™ Electronic USB Digital Picture Frame

•Wood 5x7 decorative frame (may be already attached to unit)

•External power supply with cable, 120 VAC, 60 Hz

•USB Cable (2 meters)

•Digital PixMaster™ PC compatible photo slideshow software and USB Drivers on CD-ROM

•This Users Manual

•Mail-in registration/warranty card (inserted into manual)

Make sure all of these parts are included before continuing.

If something is missing from the above list, contact customer service at: 1-888-999-0732.

4.2Registration & Your Product Serial Number

Please record the model and serial number from the bar coded label located on the rear of the MemoryFrame to keep for reference. The serial number is required for Technical Support and Product Registration. See Figure 2 for location of model and serial number.

Copyright© 2002 Pacific Digital Corporation Page 6