AV IN/OUT SETUP screen (continued)
Item | Display | Description of settings | |
mode | |||
|
| ||
|
|
| |
INT MIC | (Camera) | Determines whether or not input from the internal microphone is used | |
|
| during recording. | |
|
| ON: Uses internal microphone input. | |
|
| OFF: Does not use internal microphone input. |
DISPLAY SETUP screen
Item | Display | Description of settings |
|
|
mode |
|
| ||
|
|
|
| |
|
|
|
|
|
ZEBRA DETECT 1 | (Camera) | Selects the brightness level of the |
|
|
|
| screen. |
|
|
|
| 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105% |
|
|
ZEBRA DETECT 2 | (Camera) | Selects the brightness level of the |
|
|
|
| screen. |
|
|
|
| 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, |
|
|
|
| OFF |
|
|
|
| <Note> |
|
|
|
| The zebra patterns do not appear if you select OFF. |
|
|
MARKER | (Camera) | Select ON to display the marker. (Page 39) |
|
|
|
| ON, OFF |
|
|
|
| To display the marker, press the ZEBRA button. |
|
|
SAFETY ZONE | (Camera) | Sets SAFETY ZONE to ON or OFF. |
|
|
|
| OFF, 90%, 4:3, 13:9, 14:9 |
|
|
FOCUS BAR | (Camera) | Turns the FOCUS ASSIST bar display ON or OFF. |
|
|
|
| ON, OFF |
|
|
|
| When set to ON, the FOCUS ASSIST bar can be displayed. |
|
|
VIDEO OUT OSD | (Camera) | Select ON to output the information displayed on the screen together |
|
|
| (MCR) | with the signals from the VIDEO IN/OUT jack. |
|
|
|
| ON, OFF |
|
|
DATE/TIME | (Camera) | Sets whether to display the date and time on the screen and whether to |
|
|
| (MCR) | output from the VIDEO IN/OUT jack. |
|
|
|
| OFF: |
|
|
|
| The date and time are not displayed. |
|
|
|
| TIME: |
|
|
|
| The time is displayed. |
|
|
|
| DATE: |
|
|
|
| The date is displayed. |
|
|
|
| TIME&DATE: |
|
|
|
| The time and date are displayed. |
|
|
LEVEL METER | (Camera) | Select ON to display the audio level meter. |
|
|
| ||||
| (MCR) | ON OFF |
| Menu |
ZOOM·FOCUS | (Camera) | Selects the unit of zoom and focus values. |
| |
|
| |||
|
| OFF, NUMBER, mm/feet, mm/m |
|
|
|
| <Note> |
|
|
|
| Use the mm/feet or mm/m display only as a general guideline since it is |
|
|
|
|
| ||
|
| not entirely accurate. |
|
|
CARD/BATT | (Camera) | Select ON to display the remaining P2 card recording capacity and |
|
|
| (MCR) | remaining battery charge. |
|
|
|
| ON, OFF |
|
|
P2CARD REMAIN | (Camera) | Determines how remaining P2 card capacity is displayed. |
|
|
| (MCR) |
|
| |
|
| currently being recorded. |
|
|
|
| TOTAL: Displays the total amount of space that is left on P2 cards |
|
|
|
| inserted in the camera. |
|
|
___indicates the factory setting. | 107 |