Using SD/SDHC memory cards
You can use SD and SDHC memory cards (the term “SD memory card” is used for both hereafter) to save and load SCENE files and USER files, and to upload clip meta data. (Page 54)
Installing and removing the SD memory card
Installation
1 Lift up the viewfinder, press the side of the card slot cover (A), and slide the cover (B) to open it.
2 Insert the card while making sure it is oriented in the proper direction.
Access lamp
2
3 Close the card slot cover.
Removal
1 Open the card slot cover, and check that the access lamp is not lit.
2 Press the card further into the unit, grasp the card, and then remove.
3 Close the card slot cover.
Formatting SD memory card
1
2 Press the mode button and set it to MCR mode (the MCR lamp lights).
3
4 On the menu, select OPERATION, FORMAT and then SD CARD. (Page 67)
• Select EXIT to cancel the formatting.
THUMBNAIL |
|
|
|
|
| |
| DELETE |
|
|
| ||
|
|
|
|
| ||
OPERATION |
| FORMAT |
|
|
| |
PROPERTY |
|
| SLOT1 | |||
| REPAIR CLIP |
| ||||
META DATA |
|
| SLOT2 | |||
|
| |||||
EXIT | SD CARD | |||||
EXCH.THUMBNAIL | ||||||
| EXIT | |||||
| EXIT |
| ||||
|
|
|
| |||
|
|
|
|
|
| |
5 Select YES on the confirmation screen.
•The selected SD memory card is formatted.
•You can also format from the SD CARD FORMAT option on the CARD FUNCTIONS screen. (Page 109)
•With SDHC cards, 32 KB of capacity will have been used.
Cautions in using SD memory cards
•SD memory cards used with the
SD (from 8 MB to 2 GB):
8 MB 16 MB 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 2 GB
SDHC (4 GB to 16 GB):
4 GB 8 GB 16 GB
For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web sites.
•SD memory cards must not be used or stored in an environment where they may be Exposed to high temperatures/humidities;
Exposed to water droplets; or Electrically charged.
•Be sure always close the cover when using an SD memory card.
•See also “Checkpoints for using memory cards” on Page 122.
28