• Metadata of a clip with the incomplete clip

3 Push the Operation lever in the E or R

indicator cannot be edited. To edit metadata of a

direction to make a selection and press it

clip recorded in multiple P2 cards, insert all the

again.

 

 

 

 

 

 

 

P2 cards containing video data of the clip before

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

starting editing.

 

THUMBNAIL

LOAD

 

 

 

 

• If MEMO contains 100 or more characters, it

 

OPERATION

RECORD

 

 

 

 

 

 

 

 

PROPERTY

USER CLIP NAME

 

 

 

cannot be edited.

 

 

 

 

 

META DATA

 

INITIALIZE

 

 

 

 

 

 

 

 

 

PROPERTY

 

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

 

 

 

 

Uploading the metadata (META DATA)

 

 

 

 

 

 

 

 

 

LOAD:

 

 

 

 

 

 

 

You can perform any of the following operations. If

 

 

 

 

 

 

 

 

Select this to load the metadata recorded on

necessary, make preparations prior to undertaking

 

 

the SD memory card into the unit.

the operations.

 

 

When the Operation lever is pressed with

Loading the metadata

 

 

operation moved to LOAD, the metadata

• Insert the SD memory card on which the

 

 

on the SD memory card will be displayed.

metadata is recorded into the unit. (For details on

 

 

Therefore, press the Operation lever again.

creating the metadata, see Page 56.)

 

 

Select YES to load the metadata or NO to

Selecting whether to record the metadata on

 

 

cancel the loading, and press the Operation

the P2 card

 

 

lever.

 

 

 

 

 

 

 

Changing recording method of USER CLIP

 

 

 

 

 

 

 

 

 

• If characters other than single-byte

NAME

 

 

alphanumeric characters are used in the

Initializing the metadata inside the unit

 

 

metadata file name to be loaded, they are

Confirming and editing camera-recorder

 

 

displayed as “∗”.

metadata

 

RECORD:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 On the thumbnail screen, press the MENU

 

Select this to set whether to record the

 

metadata to be loaded into the unit

 

simultaneously on a P2 card.

button.

 

 

Select ON to record the metadata or OFF

A menu now appears. (Page 63)

 

 

to cancel the recording, and press the

2 Push the Operation lever in the E or R

 

 

Operation lever. The factory setting for this

direction to select META DATA and press it

 

mode is OFF.

(or push it in the Q direction) again.

USER CLIP NAME:

 

 

 

 

 

The USER CLIP NAME recording method

 

THUMBNAIL

 

 

 

 

 

 

is selectable. Please refer to Appendix

 

OPERATION

 

 

 

 

PROPERTY

 

 

 

(Page 124).

 

 

 

 

INITIALIZE:

 

 

 

 

 

 

 

 

META DATA

 

 

 

 

 

 

 

 

 

 

EXIT

 

 

 

Select this to initialize the metadata which

 

 

 

 

 

has been recorded in the unit.

 

 

 

 

 

 

 

 

 

 

Select YES to initialize the metadata or NO

 

 

 

 

 

to cancel the initialization, and press the

 

 

 

 

 

Operation lever. All the settings including the

 

 

 

 

 

ON or OFF setting for RECORD are now

 

 

 

 

 

cleared.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Continued on the next page)

Playback

71